Northwest had moved decisively to introduce jet equipment over the North Pacific with its introduction of the DC-8, but Boeing’s steady evolution of the 707 platform won NWA over with its model 720B for domestic and Hawaiian routes. As the 707-320 Intercontinental design was firmed, NWA seized the opportunity to add that type and enjoy both high commonality with its 720Bs and also the leap in range and capacity over the DC-8-20s for its Pacific and high-traffic U.S. routes.
Northwest’s 320B models came with a modification – per a May 1963 press release: “Northwest revealed a revolutionary concept in cabin design, to allow the carrier to increase substantially its lift of trans-Pacific air cargo, without reducing its passenger capacity.
“A large door cargo compartment, with space for five tons of cargo, was incorporated into cabin design… will allow Northwest to provide, on the same flight, cargo lift equivalent to that provided today on the carrier’s piston-engined all-cargo aircraft as well as the passenger capacity of NWA’s present jet transports.
“The special cargo compartment will run for 37 feet aft from the passenger entrance along the left side of the forward cabin. It will have an average floor width of 50 inches. Access to this compartment for loading and unloading operations will be through a huge cargo door, with an effective opening of 91 by 134 inches.”
The 707 fleet would encompass five of the -320B, with its first received on June 5, 1963, and thirty one of the -320C models, with the final delivery in 1968. (The B models would also get upgraded to the C configuration.) Some of the C models would be transformed into dedicated freighters, as well. Much of the fleet was replaced in the mid-1970s with new DC-10s and 747 Freighters, with the final passenger examples handling sectors south of Tokyo as late as 1978.
If you use these photos, please credit the Northwest Airlines History Center – please also contact us to let us know how you’re using them and if we can be of further help!